5A Pellet,Sphere Molecular Sieve Bed

5A Molecular Sieve Bed 1) Normal paraffin separating process 2) Oxygen/hydrogen PSA (Pressure Swing Adsorption) process

Molecular Sieve 5A is an alkali alumino silicate; it is the calcium form of the Type A crystal structure. The pore size of 5A molecular sieve is about 5Å . It can adsorb all kind of molecular smaller than this size, it is mainly used in separation of the normal and isomerous alkane; pressure swing adsorption (PSA) for gases; co-adsorption of moisture and carbon dioxide.

Application:   1) Normal paraffin separating process   2) Oxygen/hydrogen PSA (Pressure Swing Adsorption) process   3) Ethanol refinement (moisture, CO2, etc.)  4) Refining SF6 refrigerant for power (removing moisture and hydrocarbon) Formula: 0.7CaO·0.30Na2O·Al2O3·2.0SiO2 · 4.5H2O Technical parameter:

Item	Unit	Target
Shape		pallet		Sphere
Diameter	mm	1.5-1.7	3.0-3.3	2.0-3.0	3.0-5.0
Size ratio up to grade	% min	98	98	96	96
Bulk density	g/ml min	0.68~0.75
Wear ratio	% max	0.20	0.25	0.20	0.20
Crushing strength	N min	30/cm	45/cm	30/p	60/p
Water absorption	% min	21.5	21.5	21.5	21.5
N-hexane adsorption	% min	14	14	14	14
Packing water	% max	1.5	1.5	1.5	1.5

This is the typical parameter for type 5A molecular sieve, different application require different technical parameters, please contact us for detail. Regeneration      Molecular Sieve Type 5A can be regenerated by pressure swing or purging, usually at elevated temperatures. The purge gas temperature must be sufficiently high to bring the molecular sieve to a level of 200°C - 300°C. A proper regenerated molecular sieve can produce water dew poins below -100°C and CO2 or H2S levels below 2 ppmv. Attention:Do not unpack the goods until using, avoid of exposure in air for a long time.Should be stuffed as rapid as possible at filling. 

5A Pellet,Sphere Molecular Sieve Bed